Ad
related to: allen manufacturing dampers for cars
Search results
Results From The WOW.Com Content Network
Harmonic balancer lower pulley on a four-cylinder engine. A harmonic damper is a device fitted to the free (accessory drive) end of the crankshaft of an internal combustion engine to counter torsional and resonance vibrations from the crankshaft. This device must be an interference fit to the crankshaft in order to operate in an effective manner.
A magnetorheological damper or magnetorheological shock absorber is a damper filled with magnetorheological fluid, which is controlled by a magnetic field, usually using an electromagnet. [1][2][3] This allows the damping characteristics of the shock absorber to be continuously controlled by varying the power of the electromagnet.
Shock absorber. Miniature oil-filled Coilover shock components for scale cars. A shock absorber or damper is a mechanical or hydraulic device designed to absorb and damp shock impulses. It does this by converting the kinetic energy of the shock into another form of energy (typically heat) which is then dissipated.
MagneRide is an automotive adaptive suspension with magnetorheological damper system developed by the Delphi Automotive corporation, [1][2] that uses magnetically controlled dampers, or shock absorbers, for a highly adaptive ride. As opposed to traditional suspension systems, MagneRide has no mechanical valves or even small moving parts that ...
Friction disk shock absorbers or André Hartford dampers were an early form of shock absorber or damper used for car suspension. They were commonly used in the 1930s but were considered obsolete post-war. [1] Compared to modern shock absorbers friction dampers only provided limited shock absorption but served mainly to damp down oscillation.
Hydropneumatic suspension is a type of motor vehicle suspension system, designed by Paul Magès, invented by Citroën, and fitted to Citroën cars, as well as being used under licence by other car manufacturers. Similar systems are also widely used on modern tanks and other large military vehicles. The suspension was referred to as Suspension ...
A Stockbridge damper is a tuned mass damper used to suppress wind-induced vibrations on slender structures such as overhead power lines, [1] long cantilevered signs [2] and cable-stayed bridges. The dumbbell -shaped device consists of two masses at the ends of a short length of cable or flexible rod, which is clamped at its middle to the main ...
According to the standards of the Tire and Rim Association, these recommended pressures caused the front tires to be overloaded whenever there were two or more passengers in the car. An unadvertised at-cost option (#696) included upgraded springs and dampers, front anti-roll bars and rear-axle-rebound straps to prevent tuck-under.
Ad
related to: allen manufacturing dampers for cars