Search results
Results From The WOW.Com Content Network
Code Countries Allocated use 0000 Europe: Non-discrete mode A code; shall not be used. [1]UK: Mode C or other SSR failure [2]: US: Should never be assigned. [3]Military intercept code.
Identification, friend or foe (IFF) is a combat identification system designed for command and control. It uses a transponder that listens for an interrogation signal and then sends a response that identifies the broadcaster. IFF systems usually use radar frequencies, but other electromagnetic frequencies, radio or infrared, may be used. [1]
The aviation transponder interrogation modes are the standard formats of pulsed sequences from an interrogating Secondary Surveillance Radar (SSR) or similar Automatic Dependent Surveillance-Broadcast (ADS-B) system. The reply format is usually referred to as a "code" from a transponder, which is used to determine detailed information from a ...
A discrete transponder code (often called a squawk code) is assigned by air traffic controllers to identify an aircraft uniquely in a flight information region (FIR). This allows easy identification of aircraft on radar. [6] [7] Codes are made of four octal digits; the dials on a transponder read from zero to seven, inclusive. Four octal digits ...
IFF Mark X was the NATO standard military identification friend or foe transponder system from the early 1950s until it was slowly replaced by the IFF Mark XII in the 1970s. It was also adopted by ICAO, with some modifications, as the civilian air traffic control (ATC) secondary radar (SSR) transponder. The X in the name does not mean "tenth ...
Detection and Ranging System (DRS), part of the Target Recognition and Attack Multi-sensor (TRAM) A-6E Intruder. Hughes Aircraft (now Raytheon) AN/AAS-35. Pave Penny Target Identification Set, Laser (TISL) A-10A Thunderbolt II. Martin Marietta. AN/AAS-38. Nite Hawk pod-mounted FLIR laser designation system.
The transponder has a small required set of controls and is simple to operate. It has a method to enter the four-digit transponder code, also known as a beacon code or squawk code, and a control to transmit an ident, which is done at the controller's request (see SPI pulse below). Transponders typically have 4 operating modes: Off, Standby, On ...
In fiber-optic communications, a transponder is the element that sends and receives the optical signal from a fiber. A transponder is typically characterized by its data rate and the maximum distance the signal can travel. The term "transponder" can apply to different items with important functional differences, mentioned across academic and ...