Search results
Results From The WOW.Com Content Network
The Mode A code 7776 is assigned as a test code by the ORCAM Users Group, specifically for the testing of transponders. [18] 7777 US, Germany, UK, Belgium, Netherlands: Non-discrete code used by fixed test transponders (RABMs) to check correctness of radar stations (BITE). US
Gillham code is a zero-padded 12-bit binary code using a parallel nine- [1] to eleven-wire interface, [2] the Gillham interface, that is used to transmit uncorrected barometric altitude between an encoding altimeter or analog air data computer and a digital transponder. It is a modified form of a Gray code and is sometimes referred to simply as ...
An equipment code describes the communication (COM), navigation (NAV), approach aids and surveillance transponder equipment on board an aircraft. These alphabetic codes are used on FAA and ICAO flight plan forms to aid Flight service station (FSS) personnel in their handling of aircraft. On the FAA domestic flight plan form (FAA Form 7233-1 ...
The aviation transponder interrogation modes are the standard formats of pulsed sequences from an interrogating Secondary Surveillance Radar (SSR) or similar Automatic Dependent Surveillance-Broadcast (ADS-B) system. The reply format is usually referred to as a "code" from a transponder, which is used to determine detailed information from a ...
This is a list of the free-to-air channels that are currently available via satellite from SES Astra satellites (Astra 2E / 2F / 2G) at orbital position 28.2 °E, serving Ireland and the United Kingdom. Sky and Freesat use these satellites to deliver their channels. If one was to change providers between Sky and Freesat, one would not require a ...
Radio-frequency identification. Radio-frequency identification (RFID) uses electromagnetic fields to automatically identify and track tags attached to objects. An RFID system consists of a tiny radio transponder called a tag, a radio receiver, and a transmitter. When triggered by an electromagnetic interrogation pulse from a nearby RFID reader ...
Identification, friend or foe (IFF) is a combat identification system designed for command and control. It uses a transponder that listens for an interrogation signal and then sends a response that identifies the broadcaster. IFF systems usually use radar frequencies, but other electromagnetic frequencies, radio or infrared, may be used. [1]
IFF Mark X was the NATO standard military identification friend or foe transponder system from the early 1950s until it was slowly replaced by the IFF Mark XII in the 1970s. It was also adopted by ICAO, with some modifications, as the civilian air traffic control (ATC) secondary radar (SSR) transponder. The X in the name does not mean "tenth ...