Search results
Results From The WOW.Com Content Network
Ten-codes, officially known as ten signals, are brevity codes used to represent common phrases in voice communication, particularly by law enforcement and in citizens band (CB) radio transmissions. The police version of ten-codes is officially known as the APCO Project 14 Aural Brevity Code. [1]
A police code is a brevity code, usually numerical or alphanumerical, used to transmit information between law enforcement over police radio systems in the United States. Examples of police codes include "10 codes" (such as 10-4 for "okay" or "acknowledged"—sometimes written X4 or X-4), signals, incident codes, response codes, or other status ...
Technically a radiotelephonic spelling alphabet, it goes by various names, including NATO spelling alphabet, ICAO phonetic alphabet and ICAO spelling alphabet. The ITU phonetic alphabet and figure code is a rarely used variant that differs in the code words for digits.
Many car audio systems (car radios) have a so-called 'radio code' number which needs to be entered after a power disconnection. This was introduced as a measure to deter theft of these devices. If the code is entered correctly, the radio is activated for use. Entering the code incorrectly several times in a row will cause a temporary or ...
Their radio code always ends in Lincoln-10 (e.g., the watch commander at division 6 or Hollywood Area station is always 6-L-10). The watch commander is responsible for the geographic area (e.g. "Southwest Area") and reports to the area patrol captain I.
Both the Amateur Extra Class' 20 words-per-minute (WPM); and General and Advanced classes' 13 WPM Morse code tests, were removed in favor of a standardized 5 WPM as the sole Morse code requirement for both the General and Extra Class licenses.
Voice procedure communications are intended to maximize clarity of spoken communication and reduce errors in the verbal message by use of an accepted nomenclature. It consists of a signalling protocol such as the use of abbreviated codes like the CB radio ten-code, Q codes in amateur radio and aviation, police codes, etc., and jargon.
One "S" difference should correspond to 6 dB at signal strength (2x voltage = 4x power). On VHF and UHF receivers used for weak signal communications, S9 often corresponds to 5 μV at the antenna terminal 50 ohms. Amateur radio (ham) operators may also use a signal strength of "20 to 60 over 9", or "+20 to +60 over 9."
The International Code of Signals ( INTERCO) is an international system of signals and codes for use by vessels to communicate important messages regarding safety of navigation and related matters. Signals can be sent by flaghoist, signal lamp ("blinker"), flag semaphore, radiotelegraphy, and radiotelephony.
Z Code (like and X Code) is a set of operating signals used in CW, and RTTY radio communication.