Search results
Results From The WOW.Com Content Network
Ten-codes, officially known as ten signals, are brevity codes used to represent common phrases in voice communication, particularly by law enforcement and in citizens band (CB) radio transmissions. The police version of ten-codes is officially known as the APCO Project 14 Aural Brevity Code. [1]
A police code is a brevity code, usually numerical or alphanumerical, used to transmit information between law enforcement over police radio systems in the United States. Examples of police codes include "10 codes" (such as 10-4 for "okay" or "acknowledged"—sometimes written X4 or X-4), signals, incident codes, response codes, or other status ...
Because the ITU governs all international radio communications, it was also adopted by most radio operators, whether military, civilian, or amateur. It was finally adopted by the IMO in 1965. During 1947 the ITU adopted the compound Latinate prefix-number words (Nadazero, Unaone, etc.), later adopted by the IMO during 1965. [citation needed]
Code 20: Notify media (or media already on scene) Code 30: Burglar alarm (can be Code 30-Silent) Code 30-Adam: Burglar alarm, location is monitored with audio by security company
A Radio code is any code that is commonly used over a telecommunication system such as Morse code, ... This page was last edited on 20 March 2024, at 02:27 (UTC).
Code 1: A time critical event with response requiring lights and siren. This usually is a known and going fire or a rescue incident. Code 2: Unused within the Country Fire Authority. Code 3: Non-urgent event, such as a previously extinguished fire or community service cases (such as animal rescue or changing of smoke alarm batteries for the ...
Map showing the numeral codes for amateur radio call signs in the United States. The region in which the operator was licensed determines the numeral. United States amateur radio call signs consist of one or two letters, followed by a single digit, and closing with one to three more letters.
One "S" difference should correspond to 6 dB at signal strength (2x voltage = 4x power). On VHF and UHF receivers used for weak signal communications, S9 often corresponds to 5 μV at the antenna terminal 50 ohms. Amateur radio (ham) operators may also use a signal strength of "20 to 60 over 9", or "+20 to +60 over 9."
Signals can be sent by flaghoist, signal lamp ("blinker"), flag semaphore, radiotelegraphy, and radiotelephony. The International Code is the most recent evolution of a wide variety of maritime flag signalling systems.
There are at least three sets of Z codes. 1. One set of codes was originally developed by Cable & Wireless Ltd. (the Cable & Wireless Service Z code) for commercial communications in the early days of wire and radio communications. The old C&W Z codes are not widely used today. 2. APCO [clarification needed] also developed a system of Z codes. [1]