Net Deals Web Search

Search results

1. Results From The WOW.Com Content Network

2. Harmonic damper - Wikipedia

   en.wikipedia.org/wiki/Harmonic_damper

   Harmonic balancer lower pulley on a four-cylinder engine. A harmonic damper is a device fitted to the free (accessory drive) end of the crankshaft of an internal combustion engine to counter torsional and resonance vibrations from the crankshaft. This device must be an interference fit to the crankshaft in order to operate in an effective manner.

3. Torsional vibration - Wikipedia

   en.wikipedia.org/wiki/Torsional_vibration

   Tuned absorber type of "dampers" often referred to as a harmonic dampers or harmonic balancers (even though it technically does not damp or balance the crankshaft). This damper uses a spring element (often rubber in automobile engines) and an inertia ring that is typically tuned to the first torsional natural frequency of the crankshaft. This ...

4. Engine balance - Wikipedia

   en.wikipedia.org/wiki/Engine_balance

   Engine balance refers to how the inertial forces produced by moving parts in an internal combustion engine or steam engine are neutralised with counterweights and balance shafts, to prevent unpleasant and potentially damaging vibration. The strongest inertial forces occur at crankshaft speed (first-order forces) and balance is mandatory, while ...

5. Tuned mass damper - Wikipedia

   en.wikipedia.org/wiki/Tuned_mass_damper

   Tuned mass damper. A tuned mass damper (TMD), also known as a harmonic absorber or seismic damper, is a device mounted in structures to reduce mechanical vibrations, consisting of a mass mounted on one or more damped springs. Its oscillation frequency is tuned to be similar to the resonant frequency of the object it is mounted to, and reduces ...

6. Straight-eight engine - Wikipedia

   en.wikipedia.org/wiki/Straight-eight_engine

   However, crankshaft torsional vibration, present to some degree in all engines, is sufficient to require the use of a harmonic damper at the accessory end of the crankshaft. Without such damping, fatigue cracking near the rear main bearing journal may occur, leading to engine failure.

7. Balance shaft - Wikipedia

   en.wikipedia.org/wiki/Balance_shaft

   This engine was the first to locate one balance shaft higher than the other, to counteract the second order rolling couple (i.e. about the crankshaft axis) due to the torque exerted by the inertia caused by increases and decreases in engine speed. [6] [7] In a flat-four engine, the forces are cancelled out by the pistons moving in opposite ...