Search results
Results From The WOW.Com Content Network
Ten-codes, officially known as ten signals, are brevity codes used to represent common phrases in voice communication, particularly by law enforcement and in citizens band (CB) radio transmissions. The police version of ten-codes is officially known as the APCO Project 14 Aural Brevity Code.
The 10-meter band is a portion of the shortwave radio spectrum internationally allocated to amateur radio and amateur satellite use on a primary basis. The band consists of frequencies stretching from 28.000 to 29.700 MHz.
Individual amateur stations are free to use any frequency within authorized frequency ranges; authorized bands may vary by the class of the station license. Radio amateurs use a variety of transmission modes, including Morse code, radioteletype, data, and voice.
As a matter of convention, the ITU divides the radio spectrum into 12 bands, each beginning at a wavelength which is a power of ten (10 n) metres, with corresponding frequency of 3×10 8−n hertz, and each covering a decade of frequency or wavelength. Each of these bands has a traditional name.
Most radio propagation beacons use amateur radio frequencies. They can be found on LF, MF, HF, VHF, UHF, and microwave frequencies. Microwave beacons are also used as signal sources to test and calibrate antennas and receivers.
Two PRN ranging codes are transmitted on L5 in quadrature: the in-phase code (called I5-code) and the quadrature-phase code (called Q5-code). Both codes are 10,230 chips long, transmitted at 10.23 Mchip/s (1 ms repetition period), and are generated identically (differing only in initial states).
Continuous Tone-Coded Squelch System. In telecommunications, Continuous Tone-Coded Squelch System or CTCSS is one type of in-band signaling that is used to reduce the annoyance of listening to other users on a shared two-way radio communication channel.
The federal government has the frequencies from 27.540 up to 28.000. Many civilian agencies use, or used to use, the frequencies 27.575 and 27.585 for low-power use. The US Coast Guard Auxiliary uses 27.980 MHz, it is similar to the Civil Air Patrol Frequency 26.620 MHz.
Intermediate frequencies are used in superheterodyne radio receivers, in which an incoming signal is shifted to an IF for amplification before final detection is done. Conversion to an intermediate frequency is useful for several reasons.
Radio frequency (RF) is the oscillation rate of an alternating electric current or voltage or of a magnetic, electric or electromagnetic field or mechanical system in the frequency range from around 20 kHz to around 300 GHz.